All Products

Keeps gauge console close to diver, and easy to use. Stainless Steel cable 60-lb. Break Force 24-oz Retraction Force RT4 series compact SCUBA Cons...

The CL13 is similar to the popular CL14 Mini Retractor but it sports a larger clip, stronger spring force and less extension. 1” snap clip attache...

6’ (183 cm) length / Large 12” (30.5 cm) circumference Lower pocket accommodates a lead weight or finger spool Open bottom with anti-spill baffle ...

Nickel-plated brass housing. Durable, Lexan lens Airspool with Viton o-rings included. Luminescent gauge face Wide 240º sweep from 0 to 5000 psi M...

Superior tilt potential of +/- 30 degrees Complete: compass module, bungee mount & bungee cord 30 inches (76 cm) length of 4mm bungee cord Mou...

Retractable Tether for Large scuba Flashlights (4-C to 8-D) and Cameras 12oz retraction force. 42" Extension 80lb break/release Quick Connect Gear...

Retractable tether for small Scuba Flashlights (up to 4-AA) and Single Gauge Computers or Compasses 9oz retraction force. 32" extension 60lb break...

Larger diameter black handle is easier to carry A 3-bar slide allows for length adjustment Larger diameter black handle is easier to carry. A 3-ba...

Keeps gauge console close to diver, and easy to use Spectra/Nylon Line 32 inch 80-lb Break Force 24-oz Retraction Force RT3 series SCUBA Console r...

Stainless steel frame. #24 hi-viz yellow nylon 16 strand line Breaking strength is 175 lbs (80 kg) 4” stainless steel double-ender bolt snap with ...

2-way swivel Delrin and stainless steel construction Retains two standard diameter - Standard hose diameter is 0.4" (11 mm) to 0.5" (13 mm). low o...

Attaches to most brands of “large post” fins Comfort heel pad has a large finger loop, which allows easy on/off, even with thick gloves. Stronger ...

50 lbs. of positive lift. Anti-spill bottom with baffle to allow easy fill from any second stage Combination oral and BC QD inflator. Remains infl...

0 to 5000 psi (0 to 350 bar) Gauge and airspool include viton o-rings Available as gauge only or in kit form. The gauge will thread directly into ...

Has a retraction force of 3oz ideal for lighter items Extends to 36 inches Heavy-Duty Design. High Tensile Spectra/Nylon line handles abuse and fa...

Not all rubber hoses are created equal. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on...

Protect your expensive mask. Fully padded construction with plush interior Easy access, top opening with hook-and-loop strips. Innovative design a...

For gear weighting less than 3oz, to retract and hold. For heavier items used as a safety tether to simply prevent loss Threaded Stud Mount – idea...

Dedicated 300 bar DIN outlet Attachment of DIN first stages only 3/4”-14 NPSM standard inlet threads Air service only The Thermo DIN valve is for ...

XS Scuba 2" Pressure Gauge Boot

Installs between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often...

This is the male quick-disconnect of the AC992 Install on multiple second stage regulator for quick swaps This is the male quick-disconnect of the...

For use with all Gear Keeper Products that use the quick connect II (QCII) System Attaches to Camera, Flashlight and Wading staff For use with all...

Full-size and robust quality pressure gauge Nickel plated brass housing. Tempered glass lens Ready to mount directly to high pressure hose Lumines...