Earn Rewards
Earn Rewards
Protect your expensive mask. Fully padded construction with plush interior Easy access, top opening with hook-and-loop strips. Innovative design a...
View full detailsDedicated 300 bar DIN outlet Attachment of DIN first stages only 3/4”-14 NPSM standard inlet threads Air service only The Thermo DIN valve is for ...
View full detailsInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often...
View full details5mm neoprene across the back of the hand for greater warmth 4mm neoprene on the palm and inside of the fingers allows for greater dexterity and mo...
View full detailsThis is the male quick-disconnect of the AC992 Install on multiple second stage regulator for quick swaps This is the male quick-disconnect of the...
View full detailsFull-size and robust quality pressure gauge Nickel plated brass housing. Tempered glass lens Ready to mount directly to high pressure hose Lumines...
View full detailsAdd a quick-disconnect to most regulators or full face mask Installs between low pressure regulator hose and second stage Click & Lock to prev...
View full detailsVersatile options for mounting to BC and hose. Includes multiple mounting accessories Built-in scissors can cut most anything Advanced serration a...
View full detailsDesigned specifically for mesh or hard diving weights Can handle up to 60 lbs of lead weight The large, U-shaped zippered opening can accommodate ...
View full detailsCompact, DIN 1st stage uses flow-by piston design One HP and 2 MP ports Highland Mini Tech Gauge is made of brass (0-5000 psi) w/ rubber boot Mifl...
View full detailsOur smallest and lightest retractor Attach to diver with carabiner style snap clip Attach to gear with 7/8” stainless steel split ring Recommended...
View full detailsMini retractor size Attach to diver with Delrin/stainless steel snap hook Attach to gear with stainless steel split ring Recommended for slates, s...
View full detailsBack to the original “angled-back” down view design Improved closeup magnification with new single plane glass Unique design with +1.75 positive d...
View full detailsStandard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet 3/4”-14 NPSM standard inlet threads Clean for pre-blended Nitrox up t...
View full detailsSolid, one-piece, anodized aluminum handle Spool lock can mount on either end for left or right-handed use Spool is machined from Delrin, will not...
View full detailsThe ultimate cold water gloves Glued and blind-stitched seams. Seams are liquid-taped for waterproof seam Made from our finest PyroStretch 5mm neo...
View full detailsXS Scuba 2.5" Pressure Gauge Boot
Full-size and robust quality pressure gauge. Nickel plated brass housing Tempered glass lens. Ready to mount directly to high pressure hose Airspo...
View full detailsInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often...
View full details7’ long x 15” circumference, 5” diameter. Mil-Spec, urethane backed, nylon material SOLAS reflective tape on both sides for maximum visibility. El...
View full detailsValve DIN Inser 1/4” Hex Wrench. Port Plugs 3/16” Hex Wrench Valve Dip Tube 5/32” Hex Wrench. Valve Nut Slotted Screwdriver Phillips Screwdriver I...
View full detailsHigh quality injection-molded construction Self-draining and durable Round rim design for twins and boat racks High quality injection-molded const...
View full detailsNitro Bands feature an exponential power to stretch ratio that delivers unmatched contraction Maximum shaft propulsion Designed for long lasting u...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}