Earn Rewards
Earn Rewards
Designed specifically for mesh or hard diving weights Can handle up to 60 lbs of lead weight The large, U-shaped zippered opening can accommodate ...
View full detailsFull size mesh backpack. Expandable external pocket Holds a complete set of diving equipment Tough polyester mesh with thick, tarpaulin bottom pan...
View full detailsLightweight and flexible low pressure hoses. Multi-layer construction Excellent resistance to abrasion. Kink-resistant design Approved for use for...
View full details100 % UV and ozone resistant 40 % better stretch than latex. Fits Modular Quick Change Solutions Easy donning and doffing. Quick and easy replacem...
View full detailsNarrow area: 86 mm. Wide area: 110 mm Either used with fixed (glued) attachment platform or clamped onto latex seal With fixed attachment platform...
View full detailsCompact, DIN 1st stage uses flow-by piston design One HP and 2 MP ports Highland Mini Tech Gauge is made of brass (0-5000 psi) w/ rubber boot Mifl...
View full detailsA seat that grips – Polyurethane embossing in the back provides a nonslip grip and integrated abrasion protection Arm antislip Bonded high-quality...
View full detailsOur smallest and lightest retractor Attach to diver with carabiner style snap clip Attach to gear with 7/8” stainless steel split ring Recommended...
View full detailsMini retractor size Attach to diver with Delrin/stainless steel snap hook Attach to gear with stainless steel split ring Recommended for slates, s...
View full detailsBack to the original “angled-back” down view design Improved closeup magnification with new single plane glass Unique design with +1.75 positive d...
View full detailsStandard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet 3/4”-14 NPSM standard inlet threads Clean for pre-blended Nitrox up t...
View full detailsSolid, one-piece, anodized aluminum handle Spool lock can mount on either end for left or right-handed use Spool is machined from Delrin, will not...
View full detailsThe ultimate cold water gloves Glued and blind-stitched seams. Seams are liquid-taped for waterproof seam Made from our finest PyroStretch 5mm neo...
View full detailsXS Scuba 2.5" Pressure Gauge Boot
Full-size and robust quality pressure gauge. Nickel plated brass housing Tempered glass lens. Ready to mount directly to high pressure hose Airspo...
View full detailsInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often...
View full details7’ long x 15” circumference, 5” diameter. Mil-Spec, urethane backed, nylon material SOLAS reflective tape on both sides for maximum visibility. El...
View full detailsValve DIN Inser 1/4” Hex Wrench. Port Plugs 3/16” Hex Wrench Valve Dip Tube 5/32” Hex Wrench. Valve Nut Slotted Screwdriver Phillips Screwdriver I...
View full detailsHigh quality injection-molded construction Self-draining and durable Round rim design for twins and boat racks High quality injection-molded const...
View full details100% MICROCELL CR NEOPRENE - More expensive but in fact the only neoprene that really works for diving. Excellent durability and insulation far be...
View full detailsHigh Visible Orange coloured surface with reflective patches for ultimate visibility and detection Standard 10mm double layered protection in crit...
View full detailsExclusive Hood Air Venting System (HAVS) Durable Nylon ll Neoprene Rubber Waterproof H1 5/10mm Hood with Hood Air Venting System (HAVS). Durable N...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}