Earn Rewards
Earn Rewards
Add a quick-disconnect to most regulators or full face mask Installs between low pressure regulator hose and second stage Click & Lock to prev...
View full detailsNeoprene free. Outer contains 78% recycled Nylon Lightweight. Breathable. Equivalent of 2mm neoprene Wind and waterproof fabric Neutrally buoyant ...
View full detailsLightweight, high performance dual-composite fin blade featuring full-length power rails and a central flex channel. Open heel foot pocket is held...
View full detailsVersatile options for mounting to BC and hose. Includes multiple mounting accessories Built-in scissors can cut most anything Advanced serration a...
View full detailsDesigned specifically for mesh or hard diving weights Can handle up to 60 lbs of lead weight The large, U-shaped zippered opening can accommodate ...
View full detailsFull size mesh backpack. Expandable external pocket Holds a complete set of diving equipment Tough polyester mesh with thick, tarpaulin bottom pan...
View full detailsLightweight and flexible low pressure hoses. Multi-layer construction Excellent resistance to abrasion. Kink-resistant design Approved for use for...
View full details1.0 / 5.0
1 Review
Ideal for all diving and snorkeling skill levels. Flexible Power Thrust Channel directs water off the tip of the blade for improved power and effi...
View full detailsStretch neoprene for optimum fit Designed for rapid donning and doffing Watertight blind stitched seams 3mm thickness for warm water. 90% Neoprene...
View full detailsCompact, DIN 1st stage uses flow-by piston design One HP and 2 MP ports Highland Mini Tech Gauge is made of brass (0-5000 psi) w/ rubber boot Mifl...
View full detailsWristband can be used on any wrist computer or watch with 21mm band/housing connection Durable coated metal buckle Quick and easy to swap to your ...
View full detailsOur smallest and lightest retractor Attach to diver with carabiner style snap clip Attach to gear with 7/8” stainless steel split ring Recommended...
View full detailsMini retractor size Attach to diver with Delrin/stainless steel snap hook Attach to gear with stainless steel split ring Recommended for slates, s...
View full detailsBack to the original “angled-back” down view design Improved closeup magnification with new single plane glass Unique design with +1.75 positive d...
View full detailsStandard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet 3/4”-14 NPSM standard inlet threads Clean for pre-blended Nitrox up t...
View full detailsSolid, one-piece, anodized aluminum handle Spool lock can mount on either end for left or right-handed use Spool is machined from Delrin, will not...
View full detailsThe ultimate cold water gloves Glued and blind-stitched seams. Seams are liquid-taped for waterproof seam Made from our finest PyroStretch 5mm neo...
View full detailsXS Scuba 2.5" Pressure Gauge Boot
Full-size and robust quality pressure gauge. Nickel plated brass housing Tempered glass lens. Ready to mount directly to high pressure hose Airspo...
View full detailsInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often...
View full details7’ long x 15” circumference, 5” diameter. Mil-Spec, urethane backed, nylon material SOLAS reflective tape on both sides for maximum visibility. El...
View full detailsAutomatically adjusts for maximum sensitivity. Auto calibration Audible and vibrating alarms as you close in. Alarm mode adjustment button LED fla...
View full detailsBigger and better than ever, the ProPlus 4.0 features the latest Bluetooth 4.0 technology Divers can adjust and customize all their dive features ...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}